Icewood Atelier
Lemon & Lime Tray Cutter and Slump Mold Set
Lemon & Lime Tray Cutter and Slump Mold Set
In stock
The listed dimensions are the size of the tool, i.e. the wet clay. Clay shrinks during drying and firing, usually around 5–15%, and the final size of your piece always depends on your own clay and firing temperature. For example, with a 10 cm size and 12% shrinkage, the finished piece would be about 8.8 cm. Please check your clay's shrinkage before ordering and choose the size accordingly.
Couldn't load pickup availability
Everything you need to make a lemon or lime shaped serving tray or dish from clay: a matching cutter and slump mold set.
Cut your rolled slab with the lemon/lime shaped cutter, then press the cut piece down onto the slump mold — since the mold is slightly smaller than the cutter, the edges gently rise up as you press, giving the piece a soft curved tray shape straight out of the box. The mold's edges are rounded, so the tray forms a smooth, gentle curve where the sides rise, rather than a sharp bend.
As with any 3D printed tool, faint layer lines can transfer onto the clay surface. These are easy to smooth away afterwards with a damp sponge or soft cloth, if you'd like a perfectly smooth finish.
How to use:
- Roll out your clay slab and cut out the shape with the cutter.
- Place the cut piece on top of a thick piece of foam.
- Position the mold centered on top of the piece.
- Press down firmly and evenly so the edges form up around the mold.
Available in two sizes:
- Regular: cutter approx. 208 x 142mm, mold approx. 180 x 120mm
- Large: cutter approx. 250 x 167mm, mold approx. 230 x 154mm
Perfect for polymer clay and ceramic projects.
3D-printed from PLA at Icewood Atelier's workshop in Finland.
Design by Icewood Atelier.
Not food safe.
