Icewood Atelier
Adjustable Circle Cutting Guide (2-10 cm) for Clay | 3D Printed Pottery Tool
Adjustable Circle Cutting Guide (2-10 cm) for Clay | 3D Printed Pottery Tool
In stock
The listed dimensions are the size of the tool, i.e. the wet clay. Clay shrinks during drying and firing, usually around 5–15%, and the final size of your piece always depends on your own clay and firing temperature. For example, with a 10 cm size and 12% shrinkage, the finished piece would be about 8.8 cm. Please check your clay's shrinkage before ordering and choose the size accordingly.
Couldn't load pickup availability
An adjustable circle guide for scribing or cutting perfectly round circles in clay — the numbered holes (2–10, marking the radius in centimeters) let you pick your size, and the numbers are mirrored on both faces so they read right-side up no matter which end you're holding.
Push the center peg into the clay where you want the middle of your circle, then insert a needle tool, fettling knife, or similar pointed tool into the hole for your chosen radius and swing it around the peg to scribe or cut a clean circle.
Note: only the printed plastic guide is included. You'll need your own needle tool or another pointed blade tool to do the actual scribing/cutting — any standard pottery needle tool fits the holes.
Weight: approx. 10 g.
Material: PLA (biodegradable).
Not intended for food use.
Manufactured in Finland at Icewood Atelier.
⚠️ The product color may vary.
